This diagram shows all major footprint dimensions of the Coffee Bar. The reader should note that the entire system requires 10’ clearance at its highest point, counter level at 4’6 and 5’ for the rear side board including the Ice Cappuccino machine when considering vertical clearances.

On the right, at the back/top, as shown by the dotted blue line is the breaker panel. The cart requires power service to the panel at 220v@60amps with the electrical system being wired to deliver power to the following appliances:

• Cappuccino Machine 220v;
• Bean Grinder 220v;
• Drip Coffee Machine 110v;
• Compressor and Fan 110v;
• Lighting 110v;
• Water pump???v; and
• Four Outlet boxes 110v.

On the left, at the back/top, as shown by the blue dotted line is the units water pump. It draws  its supply from a spring water bottle (5gl) located below the sink and automatically maintains water pressure to both the Drip Coffee & Cappuccino Machine.

The Coffee Bar’s source(s) of hot water are then generated either from the side spout on the Coffee Machine or from the Hot Water outlet on the Cappuccino machine.

The unit does not produce significant amounts of waste water, so in it current design a good old fashioned bucket has been employed that is emptied as required.